ON Semiconductor NCS5651MNTXG Операционный усилитель
Техническая документация
Характеристики
Brand
onsemiТип монтажа
Поверхностный монтаж
Тип корпуса
QFN
Тип источника питания
Одинарный
Количество каналов на ИС
2
Число контактов
20
Типичное одиночное напряжение питания
6 → 12 В
Типичное произведение коэффициента усиления на ширину полосы пропускания
80МГц
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Полный размах напряжений
Нет
Высота
0.95мм
Ширина
4мм
Размеры
4 x 4 x 0.95мм
Длина
4мм
Информация о товаре
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
Operational Amplifiers, ON Semiconductor
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
2
P.O.A.
2
Техническая документация
Характеристики
Brand
onsemiТип монтажа
Поверхностный монтаж
Тип корпуса
QFN
Тип источника питания
Одинарный
Количество каналов на ИС
2
Число контактов
20
Типичное одиночное напряжение питания
6 → 12 В
Типичное произведение коэффициента усиления на ширину полосы пропускания
80МГц
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Полный размах напряжений
Нет
Высота
0.95мм
Ширина
4мм
Размеры
4 x 4 x 0.95мм
Длина
4мм
Информация о товаре
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required