Murata Ferrite Bead (Chip Bead), 1 x 0.5 x 0.5mm (0402 (1005M)), 470Ω impedance at 100 MHz
Техническая документация
Характеристики
Brand
MurataТип корпуса
0402 (1005M)
Импеданс при 100 МГц
470Ом
Номинальный ток
1A
Тип
Чиповые
Размеры
1 x 0.5 x 0.5мм
Длина
1мм
Глубина
0.5мм
Максимальное сопротивление пост. тока
0.20Ω
Высота
0.5мм
Материал
Феррит
Серия
BLM
Применение
Общая электроника
Страна происхождения
Thailand
Информация о товаре
SMD 0402 Ferrite Filters- BLM15EG/HB/HD/HG/PD/PG/PX Series
BLM ferrite beads from Murata are ideal for use in circuits with unstable ground lines as they do not require a ground connection. These ferrite beads are designed to function nearly as resistors at noise frequencies, leaving signal wave forms undistorted and reducing the possibility of resonance. Excellent solder heat resistance is provided by the nickel barrier construction of the external electrodes.
BLM_P ferrite beads can match power lines to a maximum of 6A dc. With low DC resistance, BLM_P variants are ideal for high current circuits. BLM15EG models also provide low DC resistance.
This series of ferrite beads are suitable for general use applications.
P.O.A.
1
P.O.A.
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
MurataТип корпуса
0402 (1005M)
Импеданс при 100 МГц
470Ом
Номинальный ток
1A
Тип
Чиповые
Размеры
1 x 0.5 x 0.5мм
Длина
1мм
Глубина
0.5мм
Максимальное сопротивление пост. тока
0.20Ω
Высота
0.5мм
Материал
Феррит
Серия
BLM
Применение
Общая электроника
Страна происхождения
Thailand
Информация о товаре
SMD 0402 Ferrite Filters- BLM15EG/HB/HD/HG/PD/PG/PX Series
BLM ferrite beads from Murata are ideal for use in circuits with unstable ground lines as they do not require a ground connection. These ferrite beads are designed to function nearly as resistors at noise frequencies, leaving signal wave forms undistorted and reducing the possibility of resonance. Excellent solder heat resistance is provided by the nickel barrier construction of the external electrodes.
BLM_P ferrite beads can match power lines to a maximum of 6A dc. With low DC resistance, BLM_P variants are ideal for high current circuits. BLM15EG models also provide low DC resistance.
This series of ferrite beads are suitable for general use applications.