Техническая документация
Характеристики
Brand
MolexКоличество контактов
8
Тип продукции
FPC разъем
Подтип
Простой коннектор FFC/FPC
Материал контактов
Фосфористая бронза, Фосфористая бронза
Шаг
0.5мм
Ток
500mA
Тип монтажа
Поверхность, Поверхностный монтаж
Тип разъема соединителя
Вилка
Тип оконцовки
Нижний контакт ZIF
Положение контакта
Двойная нижняя часть
Усилие вставки
ZIF
Ориентация
Прямой угол, Прямой угол
Блокировочный контакт
Да
Минимальная рабочая температура
-40°C
Серия
Easy-On
Контакт - тип соединителя
Вилка
Максимальная рабочая температура
105°C
Количество рядов
1
Стандарты/одобрения
Нет
Покрытие контактов
Золото поверх никеля, Золото поверх никеля
Материал корпуса
жидкокристаллический полимер, жидкокристаллический полимер
Страна происхождения
Japan
Информация о товаре
Molex Easy-On 0.50mm FFC/FPC Connectors with Double-Bottom Contacts, 505110 Series
Easy-On 0.50 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 0.50 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 0.50 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 0.50 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 0.50 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
0.5mm FFC - Molex
Информация о наличии не успела загрузиться
P.O.A.
Стандартная упаковка
1
P.O.A.
Информация о наличии не успела загрузиться
Стандартная упаковка
1
Техническая документация
Характеристики
Brand
MolexКоличество контактов
8
Тип продукции
FPC разъем
Подтип
Простой коннектор FFC/FPC
Материал контактов
Фосфористая бронза, Фосфористая бронза
Шаг
0.5мм
Ток
500mA
Тип монтажа
Поверхность, Поверхностный монтаж
Тип разъема соединителя
Вилка
Тип оконцовки
Нижний контакт ZIF
Положение контакта
Двойная нижняя часть
Усилие вставки
ZIF
Ориентация
Прямой угол, Прямой угол
Блокировочный контакт
Да
Минимальная рабочая температура
-40°C
Серия
Easy-On
Контакт - тип соединителя
Вилка
Максимальная рабочая температура
105°C
Количество рядов
1
Стандарты/одобрения
Нет
Покрытие контактов
Золото поверх никеля, Золото поверх никеля
Материал корпуса
жидкокристаллический полимер, жидкокристаллический полимер
Страна происхождения
Japan
Информация о товаре
Molex Easy-On 0.50mm FFC/FPC Connectors with Double-Bottom Contacts, 505110 Series
Easy-On 0.50 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 0.50 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 0.50 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 0.50 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 0.50 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
