MikroElektronika MIKROE-1198 Отладочный набор управления питанием
Техническая документация
Характеристики
Brand
MikroElektronikaФункция управления мощностью
Управление питанием
Классификация комплектов
Дополнительная плата
Представленное устройство
MCP73832
Наименование комплекта
VOLT USB
Информация о товаре
VOLT USB Li-Polymer Battery Charger Board
The VOLT battery charger is a smart, dual purpose board that can charge Li-Polymer batteries and another device. A Li-Polymer battery can be charged using a USB power supply and your target device can be powered by either the Li-Polymer battery or USB using on-board screw terminals (VSYS & GND).
Features & Benefits of the VOLT battery charger
• MCP73832 charge management controller from Microchip
• Power management circuitry with silkscreen markings
• VYSYS & GND screw terminals for connection to other boards/devices
• STAT & SENSE screw terminals to monitor battery charging
• Status LEDs: Power LED to indicate battery or USB connection, Charge LED to indicate battery charging.
• 4.2 V / 250 mA
Additional Boards
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 4 | P.O.A. |
| 5+ | P.O.A. |
Техническая документация
Характеристики
Brand
MikroElektronikaФункция управления мощностью
Управление питанием
Классификация комплектов
Дополнительная плата
Представленное устройство
MCP73832
Наименование комплекта
VOLT USB
Информация о товаре
VOLT USB Li-Polymer Battery Charger Board
The VOLT battery charger is a smart, dual purpose board that can charge Li-Polymer batteries and another device. A Li-Polymer battery can be charged using a USB power supply and your target device can be powered by either the Li-Polymer battery or USB using on-board screw terminals (VSYS & GND).
Features & Benefits of the VOLT battery charger
• MCP73832 charge management controller from Microchip
• Power management circuitry with silkscreen markings
• VYSYS & GND screw terminals for connection to other boards/devices
• STAT & SENSE screw terminals to monitor battery charging
• Status LEDs: Power LED to indicate battery or USB connection, Charge LED to indicate battery charging.
• 4.2 V / 250 mA