PWM Current Mode Ctrlr, 16-Pin, SOIC N

Код товара RS: 829-3364PБренд: MicrochipПарт-номер производителя: HV9120NG-G
brand-logo

Техническая документация

Характеристики

Максимальная частота преобразования

3 МГц

Выходное напряжение

4,16 В

Выходной ток

10 мА

Количество выходов

1

Метод управления

Ток, напряжение

Время спада

75нс

Тип монтажа

Поверхностный монтаж

Время нарастания

75нс

Тип корпуса

SOIC

Число контактов

16

Размеры

10 x 4 x 1.65мм

Коэффициент заполнения

49.6%

Длина

10мм

Тип контроллера ШИМ

Токовый режим

Ширина

4мм

Высота

1.65мм

Максимальное рабочее напряжение питания

13.5 V

Минимальное рабочее напряжение питания

9 В

Минимальная рабочая температура

-55 °C

Максимальная рабочая температура

+125 °C

Информация о товаре

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

PWM Current Mode Ctrlr, 16-Pin, SOIC N
Select packaging type

P.O.A.

PWM Current Mode Ctrlr, 16-Pin, SOIC N
Информация о наличии не успела загрузиться
Select packaging type

Техническая документация

Характеристики

Максимальная частота преобразования

3 МГц

Выходное напряжение

4,16 В

Выходной ток

10 мА

Количество выходов

1

Метод управления

Ток, напряжение

Время спада

75нс

Тип монтажа

Поверхностный монтаж

Время нарастания

75нс

Тип корпуса

SOIC

Число контактов

16

Размеры

10 x 4 x 1.65мм

Коэффициент заполнения

49.6%

Длина

10мм

Тип контроллера ШИМ

Токовый режим

Ширина

4мм

Высота

1.65мм

Максимальное рабочее напряжение питания

13.5 V

Минимальное рабочее напряжение питания

9 В

Минимальная рабочая температура

-55 °C

Максимальная рабочая температура

+125 °C

Информация о товаре

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip