Microchip Technology ATAVR-MICTOR38 Разъем
Техническая документация
Характеристики
Информация о товаре
Mictor 38 Trace Connector
The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.
Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Информация о товаре
Mictor 38 Trace Connector
The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.
Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.