Martindale PD240 Блок контроля индикатора напряжения
Техническая документация
Характеристики
Brand
MartindaleТип продукции
Proving Unit
Выходное напряжение
240 V
Источник питания
Батарея
Минимальная рабочая температура
-10°C
Максимальная рабочая температура
40°C
Ширина
63 mm
Длина
144мм
Материал каски/сварочной маски
31мм
Вес
180г
Стандарты/одобрения
Нет
Испытательный ток
2mA
Страна происхождения
Philippines
Информация о товаре
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Информация о наличии не успела загрузиться
P.O.A.
Calibration type
No Calibration
1
P.O.A.
Информация о наличии не успела загрузиться
Calibration type
No Calibration
1
Техническая документация
Характеристики
Brand
MartindaleТип продукции
Proving Unit
Выходное напряжение
240 V
Источник питания
Батарея
Минимальная рабочая температура
-10°C
Максимальная рабочая температура
40°C
Ширина
63 mm
Длина
144мм
Материал каски/сварочной маски
31мм
Вес
180г
Стандарты/одобрения
Нет
Испытательный ток
2mA
Страна происхождения
Philippines
Информация о товаре
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001