Техническая документация
Характеристики
Brand
LegrisТип входного соединения
С резьбой
Тип продукции
Шаровой клапан
Тип выпускного соединения
С резьбой
Материал шара
никелированная латунь
Размер выпускного отверстия
1/2 in
Материал корпуса
Латунь с покрытием из никеля
Впускное отверстие тип соединителя
Внутренний
Стандарт резьбы на выходе
G
Выпускное отверстие - тип соединителя
Внутренний
Стандарты/одобрения
Нет
Страна происхождения
France
Информация о товаре
Panel Mountable 3-way Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple quarter turn of the handle to operate the three way version to a 180° turn
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile O rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Информация о наличии не успела загрузиться
тг 54 252,39
тг 54 252,39 1 Box of 2 (ex VAT)
1
тг 54 252,39
тг 54 252,39 1 Box of 2 (ex VAT)
Информация о наличии не успела загрузиться
1
| Количество | Цена единицы |
|---|---|
| 1 - 9 | тг 54 252,39 |
| 10 - 24 | тг 52 138,08 |
| 25 - 49 | тг 50 546,76 |
| 50+ | тг 48 955,44 |
Техническая документация
Характеристики
Brand
LegrisТип входного соединения
С резьбой
Тип продукции
Шаровой клапан
Тип выпускного соединения
С резьбой
Материал шара
никелированная латунь
Размер выпускного отверстия
1/2 in
Материал корпуса
Латунь с покрытием из никеля
Впускное отверстие тип соединителя
Внутренний
Стандарт резьбы на выходе
G
Выпускное отверстие - тип соединителя
Внутренний
Стандарты/одобрения
Нет
Страна происхождения
France
Информация о товаре
Panel Mountable 3-way Ball Valve
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple quarter turn of the handle to operate the three way version to a 180° turn
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile O rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
