Keystone 8689 Держатель светодиода
Техническая документация
Характеристики
Brand
KeystoneТип продукции
Линза для светодиода
Для использования с
Through-Hole LEDs
Цвет
Прозрачный
Размер пакета светодиодов
5мм
Диапазон высоты
1.78mm
Материал каски/сварочной маски
10.9мм
Стандарты/одобрения
RoHS
Информация о товаре
Keystone LED Lens Caps - Square
This family of LED lens caps, from Keystone, are in square configurations. They are designed for use with standard 3mm (T-1) and 5mm (T-1 3/4) through-hole LEDs with both diffused and non-diffused lenses. Installation is made easy by snap-in mounting through the panel. The LEDs can then be pushed in by hand, placing them into the cap using light pressure. It is then held securely in place due to the lens cap design.
The square lens caps are ideal for protecting the LED against any physical damage, thus potentially improving the life time of the LED in harsher environments. The cap also guards the LED from any electrostatic discharge (ESD) of up to 16KV.
Available in a variety of colour options, including clear, the square LED lens caps are made from a polycarbonate material. The coloured caps are ideal for providing high contrast and visibility.
LED Mounting Hardware, Keystone Electronics
Информация о наличии не успела загрузиться
тг 2 682,00
тг 268,20 Each (In a Pack of 10) (ex VAT)
10
тг 2 682,00
тг 268,20 Each (In a Pack of 10) (ex VAT)
Информация о наличии не успела загрузиться
10
| Количество | Цена единицы | Per Упаковка |
|---|---|---|
| 10 - 40 | тг 268,20 | тг 2 682,00 |
| 50 - 190 | тг 223,50 | тг 2 235,00 |
| 200 - 490 | тг 196,68 | тг 1 966,80 |
| 500 - 990 | тг 178,80 | тг 1 788,00 |
| 1000+ | тг 174,33 | тг 1 743,30 |
Техническая документация
Характеристики
Brand
KeystoneТип продукции
Линза для светодиода
Для использования с
Through-Hole LEDs
Цвет
Прозрачный
Размер пакета светодиодов
5мм
Диапазон высоты
1.78mm
Материал каски/сварочной маски
10.9мм
Стандарты/одобрения
RoHS
Информация о товаре
Keystone LED Lens Caps - Square
This family of LED lens caps, from Keystone, are in square configurations. They are designed for use with standard 3mm (T-1) and 5mm (T-1 3/4) through-hole LEDs with both diffused and non-diffused lenses. Installation is made easy by snap-in mounting through the panel. The LEDs can then be pushed in by hand, placing them into the cap using light pressure. It is then held securely in place due to the lens cap design.
The square lens caps are ideal for protecting the LED against any physical damage, thus potentially improving the life time of the LED in harsher environments. The cap also guards the LED from any electrostatic discharge (ESD) of up to 16KV.
Available in a variety of colour options, including clear, the square LED lens caps are made from a polycarbonate material. The coloured caps are ideal for providing high contrast and visibility.