Техническая документация
Характеристики
Brand
JSTСерия
XA
Шаг
2.5мм
Количество контактов
2
Количество рядов
1
Ориентация корпуса
Прямой
Закрытый/Открытый
Закрытый
Тип монтажа
Поверхностный монтаж
Система разъемов
Провод - Плата
Метод оконцовки
Припой
Материал контактов
Сплав меди
Покрытие контактов
Олово
Номинальный ток
3.0A
Номинальное напряжение
250,0 В
Страна происхождения
Japan
Информация о товаре
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
Производственная упаковка (Катушка )
2
P.O.A.
Производственная упаковка (Катушка )
2
Техническая документация
Характеристики
Brand
JSTСерия
XA
Шаг
2.5мм
Количество контактов
2
Количество рядов
1
Ориентация корпуса
Прямой
Закрытый/Открытый
Закрытый
Тип монтажа
Поверхностный монтаж
Система разъемов
Провод - Плата
Метод оконцовки
Припой
Материал контактов
Сплав меди
Покрытие контактов
Олово
Номинальный ток
3.0A
Номинальное напряжение
250,0 В
Страна происхождения
Japan
Информация о товаре
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.