Техническая документация
Характеристики
Brand
JSTСерия
XA
Тип продукции
Штыревой разъем печатной платы
Ток
3A
Шаг
2.5мм
Материал корпуса
Стеклонаполненный нейлон
Количество контактов
6
Количество рядов
1
Ориентация
Прямой
Закрытый/Открытый
Закрытый
Блок преобразования клеммы разъема
Провод-плата
Тип монтажа
Сквозное отверстие
Материал контактов
Медный сплав
Покрытие контактов
Олово
Шаг отверстий
2.5мм
Тип оконцовки
Припой
Минимальная рабочая температура
-25°C
Контакт - тип соединителя
Вилка
Максимальная рабочая температура
85°C
Стандарты/одобрения
Нет
Напряжение
250 V
Страна происхождения
Japan
Информация о товаре
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
тг 1 475,10
тг 147,51 Each (In a Pack of 10) (ex VAT)
10
тг 1 475,10
тг 147,51 Each (In a Pack of 10) (ex VAT)
Информация о наличии не успела загрузиться
10
Информация о наличии не успела загрузиться
| Количество | Цена единицы | Per Упаковка |
|---|---|---|
| 10 - 240 | тг 147,51 | тг 1 475,10 |
| 250 - 990 | тг 134,10 | тг 1 341,00 |
| 1000 - 4990 | тг 120,69 | тг 1 206,90 |
| 5000 - 9990 | тг 107,28 | тг 1 072,80 |
| 10000+ | тг 93,87 | тг 938,70 |
Техническая документация
Характеристики
Brand
JSTСерия
XA
Тип продукции
Штыревой разъем печатной платы
Ток
3A
Шаг
2.5мм
Материал корпуса
Стеклонаполненный нейлон
Количество контактов
6
Количество рядов
1
Ориентация
Прямой
Закрытый/Открытый
Закрытый
Блок преобразования клеммы разъема
Провод-плата
Тип монтажа
Сквозное отверстие
Материал контактов
Медный сплав
Покрытие контактов
Олово
Шаг отверстий
2.5мм
Тип оконцовки
Припой
Минимальная рабочая температура
-25°C
Контакт - тип соединителя
Вилка
Максимальная рабочая температура
85°C
Стандарты/одобрения
Нет
Напряжение
250 V
Страна происхождения
Japan
Информация о товаре
JST XA Series 2.5mm Shrouded PCB Header Connectors
XA series wire to board shrouded PCB header connectors with a 2.5mm pitch. These XA 2.5 mm shrouded headers have a locking ramp device that provides a secure connection to the mating connector. This locking device also helps to prevent disconnection during the assembly process and due to vibration. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The housings of these XA series PCB headers are made from glass filled PA66 nylon which is effective against solder cracking problems. The header pins are rounded in design and reflow treated providing a low insertion force.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
