Neptune unsealed backshell,Size14 46mm L
Техническая документация
Характеристики
Brand
ITT CannonДля использования с
Круглый соединитель Neptune, круглый соединитель TNM
Размер корпуса
14
Ориентация корпуса
Прямой
Материал корпуса
Полимер
Длина
67.1 mm, 80.5 mm
Защита от изгиба ввода
Да
Серия
TNA
Страна происхождения
Hungary
Информация о товаре
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
тг 2 485,32
тг 2 485,32 Each (ex VAT)
1
тг 2 485,32
тг 2 485,32 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Информация о наличии не успела загрузиться
| Количество | Цена единицы |
|---|---|
| 1 - 9 | тг 2 485,32 |
| 10 - 49 | тг 2 235,00 |
| 50 - 99 | тг 2 109,84 |
| 100 - 249 | тг 1 868,46 |
| 250+ | тг 1 743,30 |
Техническая документация
Характеристики
Brand
ITT CannonДля использования с
Круглый соединитель Neptune, круглый соединитель TNM
Размер корпуса
14
Ориентация корпуса
Прямой
Материал корпуса
Полимер
Длина
67.1 mm, 80.5 mm
Защита от изгиба ввода
Да
Серия
TNA
Страна происхождения
Hungary
Информация о товаре
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.