ITT Cannon Male Crimp Circular Connector Contact, Wire Size 18 → 16 AWG
Техническая документация
Характеристики
Brand
ITT CannonТип соединителя
Вилка
Размер провода
18 → 16 AWG
Метод оконцовки
Обжим
Серия
T2P
Для использования с
Разъемы Trident и APD на 6/7 контактов
Тип контакта
Сигнал
Номинальный ток
13A
Длина
27.69мм
Покрытие контактов
Олово
Номинальное напряжение
30 В
Материал контактов
Сплав меди
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
+125°C
Информация о товаре
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
P.O.A.
1
P.O.A.
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
ITT CannonТип соединителя
Вилка
Размер провода
18 → 16 AWG
Метод оконцовки
Обжим
Серия
T2P
Для использования с
Разъемы Trident и APD на 6/7 контактов
Тип контакта
Сигнал
Номинальный ток
13A
Длина
27.69мм
Покрытие контактов
Олово
Номинальное напряжение
30 В
Материал контактов
Сплав меди
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
+125°C
Информация о товаре
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.