FTDI Chip FT232RL Преобразователь USB - последовательный UART
Техническая документация
Характеристики
Brand
FTDI ChipТип монтажа
Поверхностный монтаж
Тип корпуса
SSOP
Число контактов
28
Высота
1.75мм
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+85 °C
Размеры
10.2 x 5.3 x 1.75мм
Ширина
5.3мм
Ширина
5.3мм
Страна происхождения
Taiwan, Province Of China
Информация о товаре
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
FTDI ChipТип монтажа
Поверхностный монтаж
Тип корпуса
SSOP
Число контактов
28
Высота
1.75мм
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+85 °C
Размеры
10.2 x 5.3 x 1.75мм
Ширина
5.3мм
Ширина
5.3мм
Страна происхождения
Taiwan, Province Of China
Информация о товаре
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.