Техническая документация
Характеристики
Печатная краска
Черный
Отделанный слоистым пластиком
Нет
Количество ярлыков
1 Roll
Model Number p
8091678
Номер модели (p)
C.A 6541
Длина ленты
5.5 m
Ширина ленты
19 мм
Фоновая краска
Белый
Работает моделями принтера
Rhino 4200, Rhino 5200, Rhino 6000
Brand
DymoСтрана происхождения
Belgium
Информация о товаре
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
Количество | Цена единицы |
---|---|
1 - 9 | P.O.A. |
10 - 29 | P.O.A. |
30+ | P.O.A. |
Техническая документация
Характеристики
Печатная краска
Черный
Отделанный слоистым пластиком
Нет
Количество ярлыков
1 Roll
Model Number p
8091678
Номер модели (p)
C.A 6541
Длина ленты
5.5 m
Ширина ленты
19 мм
Фоновая краска
Белый
Работает моделями принтера
Rhino 4200, Rhino 5200, Rhino 6000
Brand
DymoСтрана происхождения
Belgium
Информация о товаре
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.