Техническая документация
Характеристики
Brand
DehnТип продукции
Modular Surge Protector
Тип ограничителя напряжения
Устройство защиты типа 2
Максимальное напряжение
1000V
Тип монтажа
DIN-рейка
Максимальный ток перегрузки
25kA
Серия
DG
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
80°C
Длина
54мм
Материал каски/сварочной маски
90мм
Глубина
66мм
Стандарты/одобрения
UL, CSA, KEMA
Сертификация опасной зоны
Нет
Страна происхождения
Germany
Информация о товаре
DEHNguard Modular Surge Arresters Type 2
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Информация о наличии не успела загрузиться
тг 129 223,23
тг 129 223,23 Each (ex VAT)
1
тг 129 223,23
тг 129 223,23 Each (ex VAT)
Информация о наличии не успела загрузиться
1
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 129 223,23 |
| 5 - 9 | тг 122 643,39 |
| 10 - 24 | тг 119 576,97 |
| 25 - 49 | тг 116 358,57 |
| 50+ | тг 109 778,73 |
Техническая документация
Характеристики
Brand
DehnТип продукции
Modular Surge Protector
Тип ограничителя напряжения
Устройство защиты типа 2
Максимальное напряжение
1000V
Тип монтажа
DIN-рейка
Максимальный ток перегрузки
25kA
Серия
DG
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
80°C
Длина
54мм
Материал каски/сварочной маски
90мм
Глубина
66мм
Стандарты/одобрения
UL, CSA, KEMA
Сертификация опасной зоны
Нет
Страна происхождения
Germany
Информация о товаре
DEHNguard Modular Surge Arresters Type 2
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
