Техническая документация
Характеристики
Номинальная мощность
0.0017 Kw
Расстояние растяжения
41.6см
Для ширины рейки
9мм
Ширина каретки
20мм
Длина каретки
31мм
Тип хранения инструментов
End Panel
Brand
Bosch RexrothНоминальная статическая нагрузка
2100N
Динамическая грузоподъемность
1180N
Серия производителя
R0442
Информация о товаре
Evaluation Board for VNI4140K Solid-State Relay
The board demonstrates the features of the VNI4140K quad high side smart power solid-state relay. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7A of nominal current (the typical current limitation is 0.7 to 1.7A). Thanks to the very low RDS(on) (only 80mΩ typ @ 25°C per channel) the device allows very low power consumption during operation and for this reason makes it an ideal solution for IP65/IP67 requirements. The device is compliant with IEC 61131-2 (Programmable Controllers International Standard).
Motor Controllers & Drivers, STMicroelectronics
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
Количество | Цена единицы |
---|---|
1 - 9 | P.O.A. |
10 - 24 | P.O.A. |
25 - 49 | P.O.A. |
50+ | P.O.A. |
Техническая документация
Характеристики
Номинальная мощность
0.0017 Kw
Расстояние растяжения
41.6см
Для ширины рейки
9мм
Ширина каретки
20мм
Длина каретки
31мм
Тип хранения инструментов
End Panel
Brand
Bosch RexrothНоминальная статическая нагрузка
2100N
Динамическая грузоподъемность
1180N
Серия производителя
R0442
Информация о товаре
Evaluation Board for VNI4140K Solid-State Relay
The board demonstrates the features of the VNI4140K quad high side smart power solid-state relay. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7A of nominal current (the typical current limitation is 0.7 to 1.7A). Thanks to the very low RDS(on) (only 80mΩ typ @ 25°C per channel) the device allows very low power consumption during operation and for this reason makes it an ideal solution for IP65/IP67 requirements. The device is compliant with IEC 61131-2 (Programmable Controllers International Standard).