BEL POWER SOLUTIONS INC EQ2660-9RG Изолированный DC-DC преобразователь
Техническая документация
Характеристики
Выходное напряжение
±24В пост. тока
Диапазон входного напряжения
65 → 150 V dc
Номинальная мощность
132W
Номинал входного напряжения
110 В пост. тока
Выходной ток
5.5A
Тип монтажа
Монтаж в стойку
Изолированный
Да
Количество выходов
2
Напряжение изоляции
4.2кВ пост. тока
Длина
164мм
Глубина
19.8мм
Серия
Q
Одобрено для применения на железных дорогах
Да
Стабильность вых. напряжения при изменении нагрузки
±200мВ
Минимальная температура
-25°C
Медицинская сертификация
Нет
Эффективность
89%
Максимальная температура
+71°C
Соблюдаемые стандарты
EN 45545, EN 50121-3-2:2016, EN 50121-4:2016, EN 50155:2017, EN 62368-1, IEC 62368-1
Страна происхождения
Slovakia
Информация о товаре
Power-One 66 to 132W Railway Standard DC/DC Converter - Q Series
Q series 66 to 132W DC/DC converters suitable for use in railway applications and other rugged environments. The compact, low profile design (<20mm)of these DC/DC converters enable them to be used as a modular power supply or part of a distributed power system reducing power supply volume whilst maintaining high reliability. These Q series DC/DC converters incorporate input and output filtering, signaling and protection features along with other benefits including flexible output power, high efficiency, low ripple and RFI noise and full input to output isolation. The inputs of these DC/DC converters are protected against surges and transients occurring on the source lines. The virtually unrestricted series or parallel connection capabilities of all outputs on these DC/DC power supplies enable full system flexibility and n+1 redundant operating mode. When several of these converters are connected in parallel a single wire interconnection provides automatic current sharing. These DC/DC converters have PCB boards that are coated in a protective lacquer and the whole unit is fully enclosed in a black-coated aluminium case that acts as a heatsink and RFI shield. Mounting options for these DC/DC converters include 19" DIN- rack systems where they occupy only 3U/4TE or chassis mounting using 4 screws. An additional heatsink can be fitted.
Approvals
CSA, TUV
Standards
UL/CSA 60950-1, IEC 60950-1, EN 60950-1 and railway standards EN 50155, EN 50121-3-2, and EN 50121-4.
Power-One - Euro Cassette, Isolated DC/DC Converters
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 222 400,38
тг 222 400,38 Each (ex VAT)
1
тг 222 400,38
тг 222 400,38 Each (ex VAT)
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 222 400,38 |
| 5 - 9 | тг 211 346,07 |
| 10 - 24 | тг 200 287,29 |
| 25 - 49 | тг 189 232,98 |
| 50+ | тг 178 174,20 |
Техническая документация
Характеристики
Выходное напряжение
±24В пост. тока
Диапазон входного напряжения
65 → 150 V dc
Номинальная мощность
132W
Номинал входного напряжения
110 В пост. тока
Выходной ток
5.5A
Тип монтажа
Монтаж в стойку
Изолированный
Да
Количество выходов
2
Напряжение изоляции
4.2кВ пост. тока
Длина
164мм
Глубина
19.8мм
Серия
Q
Одобрено для применения на железных дорогах
Да
Стабильность вых. напряжения при изменении нагрузки
±200мВ
Минимальная температура
-25°C
Медицинская сертификация
Нет
Эффективность
89%
Максимальная температура
+71°C
Соблюдаемые стандарты
EN 45545, EN 50121-3-2:2016, EN 50121-4:2016, EN 50155:2017, EN 62368-1, IEC 62368-1
Страна происхождения
Slovakia
Информация о товаре
Power-One 66 to 132W Railway Standard DC/DC Converter - Q Series
Q series 66 to 132W DC/DC converters suitable for use in railway applications and other rugged environments. The compact, low profile design (<20mm)of these DC/DC converters enable them to be used as a modular power supply or part of a distributed power system reducing power supply volume whilst maintaining high reliability. These Q series DC/DC converters incorporate input and output filtering, signaling and protection features along with other benefits including flexible output power, high efficiency, low ripple and RFI noise and full input to output isolation. The inputs of these DC/DC converters are protected against surges and transients occurring on the source lines. The virtually unrestricted series or parallel connection capabilities of all outputs on these DC/DC power supplies enable full system flexibility and n+1 redundant operating mode. When several of these converters are connected in parallel a single wire interconnection provides automatic current sharing. These DC/DC converters have PCB boards that are coated in a protective lacquer and the whole unit is fully enclosed in a black-coated aluminium case that acts as a heatsink and RFI shield. Mounting options for these DC/DC converters include 19" DIN- rack systems where they occupy only 3U/4TE or chassis mounting using 4 screws. An additional heatsink can be fitted.
Approvals
CSA, TUV
Standards
UL/CSA 60950-1, IEC 60950-1, EN 60950-1 and railway standards EN 50155, EN 50121-3-2, and EN 50121-4.