Техническая документация
Характеристики
Brand
AssemtechТип продукции
Reed Switch
Конфигурация контактов
SPNO
Maximum Switching Current
1A
Maximum Switching Power
30VA
Maximum Switching Voltage
250V ac
Сопротивление контакта
90mΩ
Материал контактов
Рутений
Maximum Release Time
0.03ms
Operating Time Including Bounce
0.5ms
AT Value Range
15 to 28 AT
Тип клеммы
Проволока
Тип монтажа
Для монтажа на печатную плату
Минимальная рабочая температура
-55°C
Ширина
2.7 mm
Максимальная рабочая температура
125°C
Длина
20.5мм
Стандарты/одобрения
ISO
Серия
RI
Страна происхождения
Netherlands
Информация о товаре
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Информация о наличии не успела загрузиться
тг 813,54
тг 813,54 Each (ex VAT)
1
тг 813,54
тг 813,54 Each (ex VAT)
Информация о наличии не успела загрузиться
1
| Количество | Цена единицы |
|---|---|
| 1 - 14 | тг 813,54 |
| 15 - 49 | тг 750,96 |
| 50 - 99 | тг 585,57 |
| 100 - 499 | тг 531,93 |
| 500+ | тг 397,83 |
Техническая документация
Характеристики
Brand
AssemtechТип продукции
Reed Switch
Конфигурация контактов
SPNO
Maximum Switching Current
1A
Maximum Switching Power
30VA
Maximum Switching Voltage
250V ac
Сопротивление контакта
90mΩ
Материал контактов
Рутений
Maximum Release Time
0.03ms
Operating Time Including Bounce
0.5ms
AT Value Range
15 to 28 AT
Тип клеммы
Проволока
Тип монтажа
Для монтажа на печатную плату
Минимальная рабочая температура
-55°C
Ширина
2.7 mm
Максимальная рабочая температура
125°C
Длина
20.5мм
Стандарты/одобрения
ISO
Серия
RI
Страна происхождения
Netherlands
Информация о товаре
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
