Техническая документация
Характеристики
Brand
AssemtechКонфигурация контактов
SPSPST
Тип продукции
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V dc
Сопротивление контакта
120mΩ
Материал контактов
Rhodium
Maximum Release Time
30μs
Operating Time Including Bounce
0.15ms
AT Value Range
18 to 32 AT
Тип клеммы
Проволока
Тип монтажа
Для монтажа на печатную плату
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
125°C
Стандарты/одобрения
ISO
Серия
RI
Длина
14.5мм
Страна происхождения
Netherlands
Информация о товаре
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Информация о наличии не успела загрузиться
тг 554,28
тг 554,28 Each (ex VAT)
1
тг 554,28
тг 554,28 Each (ex VAT)
Информация о наличии не успела загрузиться
1
| Количество | Цена единицы |
|---|---|
| 1 - 14 | тг 554,28 |
| 15 - 49 | тг 491,70 |
| 50 - 99 | тг 455,94 |
| 100 - 499 | тг 433,59 |
| 500+ | тг 312,90 |
Техническая документация
Характеристики
Brand
AssemtechКонфигурация контактов
SPSPST
Тип продукции
Reed Switch
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
200V dc
Сопротивление контакта
120mΩ
Материал контактов
Rhodium
Maximum Release Time
30μs
Operating Time Including Bounce
0.15ms
AT Value Range
18 to 32 AT
Тип клеммы
Проволока
Тип монтажа
Для монтажа на печатную плату
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
125°C
Стандарты/одобрения
ISO
Серия
RI
Длина
14.5мм
Страна происхождения
Netherlands
Информация о товаре
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
