Техническая документация
Характеристики
Brand
AltecnicСоединение
Сжатие
Материал корпуса
Латунь
Максимальное рабочее давление
10 бар
Размер соединения
22мм
Максимальная заданная температура
+50°C
Минимальная заданная температура
+30°C
Стандарт резьбы или тип соединения
Сжатие
Диапазон настроек температуры
+30 → +50 °C
Страна происхождения
Italy
Информация о товаре
Altecnic Mechant Thermostatic Mixing Valves
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve
Standards
BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 39 465,63
Each (ex VAT)
1
тг 39 465,63
Each (ex VAT)
1
Купить большой партией
Количество | Цена единицы |
---|---|
1 - 9 | тг 39 465,63 |
10 - 24 | тг 37 959,24 |
25 - 49 | тг 36 837,27 |
50+ | тг 35 706,36 |
Техническая документация
Характеристики
Brand
AltecnicСоединение
Сжатие
Материал корпуса
Латунь
Максимальное рабочее давление
10 бар
Размер соединения
22мм
Максимальная заданная температура
+50°C
Минимальная заданная температура
+30°C
Стандарт резьбы или тип соединения
Сжатие
Диапазон настроек температуры
+30 → +50 °C
Страна происхождения
Italy
Информация о товаре
Altecnic Mechant Thermostatic Mixing Valves
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve
Standards
BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.