RSCAL(8952495) Triple DC power supply
Техническая документация
Характеристики
Brand
Aim-TTiСерия
MX
Номер модели
MX180TP
Количество выходов
3
Напряжение питания
110 → 240В перем. тока
Выходное напряжение
0 → 60V
Выходной ток
0 → 1.5 A, 2 x 0 → 3A
Номинальная мощность
378W
Количество дисплеев
3
Тип стендового источника питания
Источник питания пост. тока с тройным выходом
Тип
Цифровой
Цифровой/аналоговый
Цифровой
Выходной разъем
Клемма
Входной разъем
IEC 320
Максимальная температура
+40°C
Минимальная температура
+5°C
Страна происхождения
United Kingdom
Информация о товаре
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
Aim-TTiСерия
MX
Номер модели
MX180TP
Количество выходов
3
Напряжение питания
110 → 240В перем. тока
Выходное напряжение
0 → 60V
Выходной ток
0 → 1.5 A, 2 x 0 → 3A
Номинальная мощность
378W
Количество дисплеев
3
Тип стендового источника питания
Источник питания пост. тока с тройным выходом
Тип
Цифровой
Цифровой/аналоговый
Цифровой
Выходной разъем
Клемма
Входной разъем
IEC 320
Максимальная температура
+40°C
Минимальная температура
+5°C
Страна происхождения
United Kingdom
Информация о товаре
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.