ADAFRUIT INDUSTRIES 2305 Оценочная плата
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESProduct Type
Evaluation Board
Power Management Function
Motor Controller
For Use With
Haptic Motor
Kit Classification
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Standards/Approvals
No
Информация о товаре
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Motor Controllers & Drivers
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESProduct Type
Evaluation Board
Power Management Function
Motor Controller
For Use With
Haptic Motor
Kit Classification
Development Board
Featured Device
DRV2605L
Kit Name
Controller Board
Standards/Approvals
No
Информация о товаре
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.