ADAFRUIT INDUSTRIES 1222 Комплект процессора и микроконтроллера
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESКлассификация
Макетная плата
Наименование комплекта
GEMMA V2
Технология
Носимые устройства
Артикул процессора
ATtiny85
Тип процессора
MCU
Информация о товаре
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESКлассификация
Макетная плата
Наименование комплекта
GEMMA V2
Технология
Носимые устройства
Артикул процессора
ATtiny85
Тип процессора
MCU
Информация о товаре
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.