ABB 2CDE601101R2010 Электронный прерыватель цепи
Техническая документация
Характеристики
Brand
ABBТип продукции
Автоматический электронный выключатель
Диапазон
Modular DIN Rail Components
Серия
EPD24
Количество каналов
1
Номинальный ток
10 A
Напряжение
24V
Тип монтажа
DIN-рейка
Характеристики размыкания
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Длина
83мм
Тип клеммы
Винт
Ширина
12.5 mm
Глубина
83мм
Стандарты/одобрения
RoHS, UL, CSA
Страна происхождения
Germany
Информация о товаре
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
ABBТип продукции
Автоматический электронный выключатель
Диапазон
Modular DIN Rail Components
Серия
EPD24
Количество каналов
1
Номинальный ток
10 A
Напряжение
24V
Тип монтажа
DIN-рейка
Характеристики размыкания
current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A)
Длина
83мм
Тип клеммы
Винт
Ширина
12.5 mm
Глубина
83мм
Стандарты/одобрения
RoHS, UL, CSA
Страна происхождения
Germany
Информация о товаре
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.