ABB 1SVR427034R2000 Источник питания для монтажа на панель и DIN-рейку
Техническая документация
Характеристики
Brand
ABBТип входного напряжения
Переменного тока / постоянного тока
Питание
240W
Тип выходного напряжения
Пост. ток
Ширина
83 mm
Минимальное входное напряжение
115В перем. тока
Страна происхождения
Germany
Информация о товаре
Switch mode power supplies CP-E series
The CP-E range of DIN Rail PSUs from ABB offer enhanced functionality. The switch mode power supply units are economic and can be operated at an ambient temperature of up to 70°C. With adjustable output voltages, they can also be adapted to the application required.
This range offers output voltages from 5 V dc to 48 V dc at output currents of 06.25 A to 20 A. Thermal efficiency of up to 90% means that there is low power and heat dissipation allowing operation of the PSU without any forced cooling.
The switch mode power supply can be snapped onto a DIN Rail according to IEC/EN 60715, and be mounted horizontally.
Approvals
UL 508, UL 60950, GOST, CCC, CE
Информация о наличии не успела загрузиться
тг 104 280,63
тг 104 280,63 Each (ex VAT)
1
тг 104 280,63
тг 104 280,63 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
ABBТип входного напряжения
Переменного тока / постоянного тока
Питание
240W
Тип выходного напряжения
Пост. ток
Ширина
83 mm
Минимальное входное напряжение
115В перем. тока
Страна происхождения
Germany
Информация о товаре
Switch mode power supplies CP-E series
The CP-E range of DIN Rail PSUs from ABB offer enhanced functionality. The switch mode power supply units are economic and can be operated at an ambient temperature of up to 70°C. With adjustable output voltages, they can also be adapted to the application required.
This range offers output voltages from 5 V dc to 48 V dc at output currents of 06.25 A to 20 A. Thermal efficiency of up to 90% means that there is low power and heat dissipation allowing operation of the PSU without any forced cooling.
The switch mode power supply can be snapped onto a DIN Rail according to IEC/EN 60715, and be mounted horizontally.
Approvals
UL 508, UL 60950, GOST, CCC, CE