4D Systems, 1.5in Arduino Compatible Display with OLED Display
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
1.5дюйм
Технология дисплея
Дисплей на органических светодиодах
Разрешение дисплея
128 x 128pixel
Viewing Area Dimensions
27 x 27мм
Размеры
45.5 x 36.0 x 13.7мм
Для использования с
Arduino
Информация о товаре
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems Passive Matrix OLED Displays
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 4 | P.O.A. |
| 5 - 9 | P.O.A. |
| 10+ | P.O.A. |
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
1.5дюйм
Технология дисплея
Дисплей на органических светодиодах
Разрешение дисплея
128 x 128pixel
Viewing Area Dimensions
27 x 27мм
Размеры
45.5 x 36.0 x 13.7мм
Для использования с
Arduino
Информация о товаре
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.