4D Systems 4.3дюйм TFT Пропускающего типа SK-43DCT 65,536
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
4.3дюйм
Разрешение
480 x 272пиксели
Сенсорный экран
Да
Тип сенсорного экрана
Резистивный
Режимы дисплея
Пропускающего типа
Технология матрицы дисплея
TFT
Количество цветов
65,536
Страна происхождения
Philippines
Информация о товаре
Capacitive Touch LCD Starter Kit with DIABLO16 processor, 4D Systems
The SK-43DCT 4.3 inch Capacitive Touch LCD Starter Kit from 4D Systems features an on-board DIABLO16 graphics controller. The DIABLO16 is driven by Extensible Virtual Engine (EVE) and benefits from features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits of the 4.3 inch Capacitive Touch LCD Starter Kit
•Dimensions: 119.5 mm x 67 mm x 15.2 mm
•Viewing area: 95.04 mm x 53.85 mm
•480 x 272 pixel resolution
•16 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•6 banks of 32750 bytes of flash memory
•32 KB SRAM
•microSD memory card socket
•FAT16 DOS compatible file access
•PWM audio pin
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.
4D Systems LCD Touchscreens
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
4.3дюйм
Разрешение
480 x 272пиксели
Сенсорный экран
Да
Тип сенсорного экрана
Резистивный
Режимы дисплея
Пропускающего типа
Технология матрицы дисплея
TFT
Количество цветов
65,536
Страна происхождения
Philippines
Информация о товаре
Capacitive Touch LCD Starter Kit with DIABLO16 processor, 4D Systems
The SK-43DCT 4.3 inch Capacitive Touch LCD Starter Kit from 4D Systems features an on-board DIABLO16 graphics controller. The DIABLO16 is driven by Extensible Virtual Engine (EVE) and benefits from features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits of the 4.3 inch Capacitive Touch LCD Starter Kit
•Dimensions: 119.5 mm x 67 mm x 15.2 mm
•Viewing area: 95.04 mm x 53.85 mm
•480 x 272 pixel resolution
•16 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•6 banks of 32750 bytes of flash memory
•32 KB SRAM
•microSD memory card socket
•FAT16 DOS compatible file access
•PWM audio pin
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.