dc 4:3 Светодиод 4D Systems 200кд/м² 350:1 17мм 3.2дюйм 54.3 x 77.7 x 17мм TFT
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
3.2дюйм
Технология дисплея
Резистивный сенсорный экран
Разрешение дисплея
240 x 320pixel
Viewing Area Dimensions
48.6 x 64.8мм
Размеры
54.3 x 77.7 x 17мм
Для использования с
Arduino
Серия
gen4
Страна происхождения
Philippines
Информация о товаре
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 9 | P.O.A. |
| 10+ | P.O.A. |
Техническая документация
Характеристики
Brand
4D SystemsРазмер дисплея по диагонали
3.2дюйм
Технология дисплея
Резистивный сенсорный экран
Разрешение дисплея
240 x 320pixel
Viewing Area Dimensions
48.6 x 64.8мм
Размеры
54.3 x 77.7 x 17мм
Для использования с
Arduino
Серия
gen4
Страна происхождения
Philippines
Информация о товаре
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.