Техническая документация
Характеристики
Brand
InvenSenseЧувствительность
-27 → -25дБ
Коэффициент направленности
Всенаправленный
Эталонное рабочее напряжение
1.62 → 3.63V
Тип монтажа
Поверхностный монтаж
Отношение сигнал/шум
65дБ(A)
Максимальный ток питания
24мкА
Размеры
4 x 3 x 1мм
Высота
1мм
Максимальная частота
20кГц
Максимальная рабочая температура
+85°C
Минимальная частота
50Гц
Минимальная рабочая температура
-40°C
Страна происхождения
Taiwan, Province Of China
Информация о товаре
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.
Audio & Acoustic Sensors, Invensense
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
5000
P.O.A.
5000
Техническая документация
Характеристики
Brand
InvenSenseЧувствительность
-27 → -25дБ
Коэффициент направленности
Всенаправленный
Эталонное рабочее напряжение
1.62 → 3.63V
Тип монтажа
Поверхностный монтаж
Отношение сигнал/шум
65дБ(A)
Максимальный ток питания
24мкА
Размеры
4 x 3 x 1мм
Высота
1мм
Максимальная частота
20кГц
Максимальная рабочая температура
+85°C
Минимальная частота
50Гц
Минимальная рабочая температура
-40°C
Страна происхождения
Taiwan, Province Of China
Информация о товаре
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.