Техническая документация
Характеристики
Brand
FestoХод
160мм
Отверстие
50мм
Серия производителя
DFM
Действие
Двойной
Максимальное рабочее давление
10 бар
Тип амортизации
Эластомер
Model Number p
170951
Размеры
294 x 148 x 64мм
Вес
7.2кг
Максимальная рабочая температура
+60°C
Длина
294мм
Ширина
148мм
Высота
64мм
Минимальная рабочая температура
-5°C
Страна происхождения
Germany
Информация о товаре
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
FestoХод
160мм
Отверстие
50мм
Серия производителя
DFM
Действие
Двойной
Максимальное рабочее давление
10 бар
Тип амортизации
Эластомер
Model Number p
170951
Размеры
294 x 148 x 64мм
Вес
7.2кг
Максимальная рабочая температура
+60°C
Длина
294мм
Ширина
148мм
Высота
64мм
Минимальная рабочая температура
-5°C
Страна происхождения
Germany
Информация о товаре
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.