United Automation A86621
Техническая документация
Характеристики
Brand
United AutomationТип принадлежностей
Контроллер PIR
Для использования с
Инфракрасные нагреватели
Номер модели
Infresco-P 6kW
Страна происхождения
United Kingdom
Информация о товаре
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a ’walk test’ facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.
Power Controller Accessories
тг 95 371,92
тг 95 371,92 Each (ex VAT)
1
тг 95 371,92
тг 95 371,92 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Информация о наличии не успела загрузиться
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 95 371,92 |
| 5 - 9 | тг 78 381,45 |
| 10 - 24 | тг 68 913,99 |
| 25+ | тг 62 334,15 |
Техническая документация
Характеристики
Brand
United AutomationТип принадлежностей
Контроллер PIR
Для использования с
Инфракрасные нагреватели
Номер модели
Infresco-P 6kW
Страна происхождения
United Kingdom
Информация о товаре
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a ’walk test’ facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.