TE Connectivity, DuraSeal Insulated Ring Terminal, M5 Stud Size, 0.5mm² to 1mm² Wire Size, Red
Техническая документация
Характеристики
Brand
TE ConnectivityСерия
Duraseal
Изоляция
С изоляцией
Изоляционный материал
Нейлон
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Размер наконечника
M5
Цвет
Красный
Покрытие контактов
Олово
Материал контактов
Медь
Габаритная длина
34.04мм
Страна происхождения
Mexico
Информация о товаре
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
тг 11 626,47
тг 11 626,47 1 Box of 25 (ex VAT)
1
тг 11 626,47
тг 11 626,47 1 Box of 25 (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 11 626,47 |
| 5 - 24 | тг 9 883,17 |
| 25 - 49 | тг 7 540,89 |
| 50 - 99 | тг 5 493,63 |
| 100+ | тг 4 894,65 |
Техническая документация
Характеристики
Brand
TE ConnectivityСерия
Duraseal
Изоляция
С изоляцией
Изоляционный материал
Нейлон
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Размер наконечника
M5
Цвет
Красный
Покрытие контактов
Олово
Материал контактов
Медь
Габаритная длина
34.04мм
Страна происхождения
Mexico
Информация о товаре
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed