ITT Cannon 192900-0437 Корпус
Техническая документация
Характеристики
Brand
ITT CannonКоличество контактов
48
Тип монтажа
Монтаж на панель
Размер разъема
Стандарт
Штекер/гнездо
Гнездо
Контакт - тип соединителя
Вилка
Метод оконцовки
Обжим
Степень защиты
IP67
Серия
Neptune Circular
Ориентация корпуса
Прямой
Материал корпуса
Полимер
Покрытие контактов
Никель
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
+105°C
Материал контактов
Медь
Страна происхождения
Hungary
Информация о товаре
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
тг 6 141,78
тг 6 141,78 Each (ex VAT)
1
тг 6 141,78
тг 6 141,78 Each (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
| Количество | Цена единицы |
|---|---|
| 1 - 9 | тг 6 141,78 |
| 10 - 49 | тг 5 802,06 |
| 50 - 99 | тг 5 462,34 |
| 100 - 249 | тг 5 136,03 |
| 250+ | тг 4 943,82 |
Техническая документация
Характеристики
Brand
ITT CannonКоличество контактов
48
Тип монтажа
Монтаж на панель
Размер разъема
Стандарт
Штекер/гнездо
Гнездо
Контакт - тип соединителя
Вилка
Метод оконцовки
Обжим
Степень защиты
IP67
Серия
Neptune Circular
Ориентация корпуса
Прямой
Материал корпуса
Полимер
Покрытие контактов
Никель
Минимальная рабочая температура
-55°C
Максимальная рабочая температура
+105°C
Материал контактов
Медь
Страна происхождения
Hungary
Информация о товаре
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.