Entrelec 1SNA115537R0500 Стандартная клемма на Din-рейку

Код товара RS: 454-716Бренд: EntrelecПарт-номер производителя: 1SNA115537R0500
brand-logo

Техническая документация

Характеристики

Цвет

Серый

Количество уровней

Тройной

Серия

SNA

Метод оконцовки

Винт

CSA кабеля

2.5мм²

Номинальное напряжение

380 В перем. тока

Номинальный ток

22A

Шаг

6мм

Минимальная рабочая температура

-5°C

Максимальная рабочая температура

+40°C

Страна происхождения

France

Информация о товаре

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Вас может заинтересовать

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

тг 2 404,86

Each (In a Pack of 5) (ex VAT)

Entrelec 1SNA115537R0500 Стандартная клемма на Din-рейку

тг 2 404,86

Each (In a Pack of 5) (ex VAT)

Entrelec 1SNA115537R0500 Стандартная клемма на Din-рейку
Информация о наличии не успела загрузиться
Вас может заинтересовать

Техническая документация

Характеристики

Цвет

Серый

Количество уровней

Тройной

Серия

SNA

Метод оконцовки

Винт

CSA кабеля

2.5мм²

Номинальное напряжение

380 В перем. тока

Номинальный ток

22A

Шаг

6мм

Минимальная рабочая температура

-5°C

Максимальная рабочая температура

+40°C

Страна происхождения

France

Информация о товаре

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Вас может заинтересовать