Bourns TBU-CA065-200-WH, Bi-Directional TVS Diode, 2-Pin DFN
Техническая документация
Характеристики
Brand
BournsТип направления
Двунаправленный
Конфигурация диода
Одинарный
Максимальное напряжение фиксации
650V
Тип монтажа
Поверхностный монтаж
Тип корпуса
DFN
Максимальное обратное напряжение стабилизации
20V
Число контактов
2
Максимальный пиковый импульсный ток
0.4A
Количество элементов на ИС
1
Минимальная рабочая температура
-55 °C
Максимальная рабочая температура
+125 °C
Размеры
6.5 x 4 x 0.85мм
Длина
6.5мм
Высота
0.85мм
Ширина
4мм
Информация о товаре
Bourns TBU-CA Series TBU High Speed Protectors
Bourns Transient Blocking Unit (TBU) electronic current limiters (ECL) are circuit protection devices triggered by excessive voltage or current and designed as an optimal circuit protection solution for industrial controls, medical electronics, automated test systems, and military and aerospace applications. They are low capacitance, single bi-directional, high speed, resettable devices which protect - within rated limits - against faults caused by short circuits, AC power cross, induction and lightning surges. Special features include ultra-fast over current protection, in a wide range of trigger currents and voltages, and reduced form factors to save board space. The TBU can be used for protection on Ethernet, RS-485, HART and other ports where dangerous surge and power cross events may occur. It can also be used in telecom applications, providing a barrier to surges while allowing high frequency signals such as VDSL2 to pass through without damage to the circuit. For sensitive electronics applications the TBU eliminates the need for large shunt protection devices by stopping - in less than one microsecond - the damaging currents from reaching protected circuits. The TBU also offers significantly lower let-through energy and overshoot protection, which reduces stress on the PCB for increased reliability and product life. Bourns TBU protection technology limits the energy allowed into sensitive electronics without loading high data rate lines with capacitance. This enables designers to place high performance protection on even their highest bandwidth applications.
Approvals
UL
Surface Mount Technology
тг 2 547,90
тг 509,58 Each (In a Pack of 5) (ex VAT)
Стандартная упаковка
5
тг 2 547,90
тг 509,58 Each (In a Pack of 5) (ex VAT)
Стандартная упаковка
5
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
| Количество | Цена единицы | Per Упаковка |
|---|---|---|
| 5 - 45 | тг 509,58 | тг 2 547,90 |
| 50 - 245 | тг 429,12 | тг 2 145,60 |
| 250 - 495 | тг 371,01 | тг 1 855,05 |
| 500 - 1245 | тг 330,78 | тг 1 653,90 |
| 1250+ | тг 308,43 | тг 1 542,15 |
Техническая документация
Характеристики
Brand
BournsТип направления
Двунаправленный
Конфигурация диода
Одинарный
Максимальное напряжение фиксации
650V
Тип монтажа
Поверхностный монтаж
Тип корпуса
DFN
Максимальное обратное напряжение стабилизации
20V
Число контактов
2
Максимальный пиковый импульсный ток
0.4A
Количество элементов на ИС
1
Минимальная рабочая температура
-55 °C
Максимальная рабочая температура
+125 °C
Размеры
6.5 x 4 x 0.85мм
Длина
6.5мм
Высота
0.85мм
Ширина
4мм
Информация о товаре
Bourns TBU-CA Series TBU High Speed Protectors
Bourns Transient Blocking Unit (TBU) electronic current limiters (ECL) are circuit protection devices triggered by excessive voltage or current and designed as an optimal circuit protection solution for industrial controls, medical electronics, automated test systems, and military and aerospace applications. They are low capacitance, single bi-directional, high speed, resettable devices which protect - within rated limits - against faults caused by short circuits, AC power cross, induction and lightning surges. Special features include ultra-fast over current protection, in a wide range of trigger currents and voltages, and reduced form factors to save board space. The TBU can be used for protection on Ethernet, RS-485, HART and other ports where dangerous surge and power cross events may occur. It can also be used in telecom applications, providing a barrier to surges while allowing high frequency signals such as VDSL2 to pass through without damage to the circuit. For sensitive electronics applications the TBU eliminates the need for large shunt protection devices by stopping - in less than one microsecond - the damaging currents from reaching protected circuits. The TBU also offers significantly lower let-through energy and overshoot protection, which reduces stress on the PCB for increased reliability and product life. Bourns TBU protection technology limits the energy allowed into sensitive electronics without loading high data rate lines with capacitance. This enables designers to place high performance protection on even their highest bandwidth applications.
Approvals
UL