Техническая документация
Характеристики
Brand
MitsubishiТип принадлежностей
Счетчик
Серия
FX2N
Тип входа
Кодирующее устройство
Количество входов
8
Тип выхода
Транзистор
Количество выходов
2
Для использования с
Серия MELSEC FX2N
Напряжение питания
5 → 24 В пост. тока
Выходной ток
500 мА
Размеры
90 x 55 x 87 мм
Страна происхождения
Japan
Информация о товаре
High Speed Counter Module for FX2N PLC
This offers an ideal means of interfacing a shaft encoder to an FX2N PLC. It counts 1 or 2 phase (A/B) inputs up to 50kHz and has two 0.5A, 5 to 24Vdc NPN open collector transistor outputs which are controlled independently from the main program cycle. Counting can be enabled or reset by the PLC or external inputs, as can count direction (up/down). The module is powered by the base unit.
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
тг 168 961,53
тг 168 961,53 Each (ex VAT)
1
тг 168 961,53
тг 168 961,53 Each (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
MitsubishiТип принадлежностей
Счетчик
Серия
FX2N
Тип входа
Кодирующее устройство
Количество входов
8
Тип выхода
Транзистор
Количество выходов
2
Для использования с
Серия MELSEC FX2N
Напряжение питания
5 → 24 В пост. тока
Выходной ток
500 мА
Размеры
90 x 55 x 87 мм
Страна происхождения
Japan
Информация о товаре
High Speed Counter Module for FX2N PLC
This offers an ideal means of interfacing a shaft encoder to an FX2N PLC. It counts 1 or 2 phase (A/B) inputs up to 50kHz and has two 0.5A, 5 to 24Vdc NPN open collector transistor outputs which are controlled independently from the main program cycle. Counting can be enabled or reset by the PLC or external inputs, as can count direction (up/down). The module is powered by the base unit.
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.