RS PRO Расходомер
Техническая документация
Характеристики
Brand
RS ProКонтролируемые среды
Жидкость
Тип устройства
Радиальная турбина
Минимальный расход
0,25 л/мин
Максимальный расход
6,5 л/мин
Напряжение питания
4,5 → 16 В пост. тока
Диапазон диаметров трубы
15 мм
Максимальное давление
20бар
Материал
Ацетальсополимер
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
+70°C
Номинальный ток
10 мА
Страна происхождения
United Kingdom
Информация о товаре
RS PRO Liquid Flow Sensors
RS PRO flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15 mm diameter pipe connections. These flow sensors are designed to tailor the transducer to any particular requirements and needs of the user. A variety of pipe connections, electrical terminations and flow ranges are possible giving several possible ways in which it can be arranged that should satisfy various applications.
Before installing flow sensors there are a few things to consider which are bends, valves, flow regulators, tee junctions and other fittings with cause the flow to travel faster at one side of the pipe relative to the other. This asymmetry in the flow can affect the calibration and the disturbance should be as far removed from the sensor as possible and ideally put after the flow sensor. Turbine transducers are affected by viscosity and where possible the viscosity (temperature) of the liquid should be kept fairly constant.
Sensor options include:
257-149 - Grey liquid flow sensor,0.25 to 6.5 l/min, 500Hz, 4600 pulses/litre
257-133 - Beige liquid flow sensor,1.5 to 30 l/min, 600Hz, 1200 pulses/litre
These RS PRO flow transducers have been manufactured to the highest standards and with correct installation and maintenance they will last a long time with reliable operation throughout.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 15 090,72
Each (ex VAT)
1
тг 15 090,72
Each (ex VAT)
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 15 090,72 |
| 5 - 9 | тг 14 362,11 |
| 10+ | тг 13 646,91 |
Техническая документация
Характеристики
Brand
RS ProКонтролируемые среды
Жидкость
Тип устройства
Радиальная турбина
Минимальный расход
0,25 л/мин
Максимальный расход
6,5 л/мин
Напряжение питания
4,5 → 16 В пост. тока
Диапазон диаметров трубы
15 мм
Максимальное давление
20бар
Материал
Ацетальсополимер
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
+70°C
Номинальный ток
10 мА
Страна происхождения
United Kingdom
Информация о товаре
RS PRO Liquid Flow Sensors
RS PRO flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15 mm diameter pipe connections. These flow sensors are designed to tailor the transducer to any particular requirements and needs of the user. A variety of pipe connections, electrical terminations and flow ranges are possible giving several possible ways in which it can be arranged that should satisfy various applications.
Before installing flow sensors there are a few things to consider which are bends, valves, flow regulators, tee junctions and other fittings with cause the flow to travel faster at one side of the pipe relative to the other. This asymmetry in the flow can affect the calibration and the disturbance should be as far removed from the sensor as possible and ideally put after the flow sensor. Turbine transducers are affected by viscosity and where possible the viscosity (temperature) of the liquid should be kept fairly constant.
Sensor options include:
257-149 - Grey liquid flow sensor,0.25 to 6.5 l/min, 500Hz, 4600 pulses/litre
257-133 - Beige liquid flow sensor,1.5 to 30 l/min, 600Hz, 1200 pulses/litre
These RS PRO flow transducers have been manufactured to the highest standards and with correct installation and maintenance they will last a long time with reliable operation throughout.