Signal Calculator 5115A
Техническая документация
Характеристики
Brand
PR ElectronicsТип модуля
Signal Calculator
Тип входного сигнала
Ток, RTD, Термопара, Напряжение
Тип выходного сигнала
Ток, Напряжение
Напряжение питания
19.2 → 300 V dc, 21.6 → 253В перем. тока
Диапазон рабочих температур
-20 → +60°C
Safety Voltage Maximum
250 V ac
Серия
5115A
Максимальная рабочая температура
+60°C
Минимальная рабочая температура
-20°C
Страна происхождения
Denmark
Информация о товаре
PR Electronics 5115A Signal Calculator
PR Electronics 5115A programmable transmitter for redundancy measurement of temperature by means of two sensors, where the secondary sensor takes over the measurement when a sensor error occurs on the primary sensor. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5115A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5115A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics DIN Rail Mounting
тг 243 807,21
тг 243 807,21 Each (ex VAT)
1
тг 243 807,21
тг 243 807,21 Each (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
PR ElectronicsТип модуля
Signal Calculator
Тип входного сигнала
Ток, RTD, Термопара, Напряжение
Тип выходного сигнала
Ток, Напряжение
Напряжение питания
19.2 → 300 V dc, 21.6 → 253В перем. тока
Диапазон рабочих температур
-20 → +60°C
Safety Voltage Maximum
250 V ac
Серия
5115A
Максимальная рабочая температура
+60°C
Минимальная рабочая температура
-20°C
Страна происхождения
Denmark
Информация о товаре
PR Electronics 5115A Signal Calculator
PR Electronics 5115A programmable transmitter for redundancy measurement of temperature by means of two sensors, where the secondary sensor takes over the measurement when a sensor error occurs on the primary sensor. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5115A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5115A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.