Phoenix Contact 3208943 Клеммная колодка на DIN-рейке с предохранителями
Техническая документация
Характеристики
Brand
Phoenix ContactЦвет
Черный
Количество уровней
Одинарный
Американский проволочный калибр AWG
24 → 10AWG (американский проволочный калибр)
Серия
PT 4-FSI/F
Метод оконцовки
Вставной
CSA кабеля
4мм²
С предохранителем
Да
Номинальный ток
10A
Номинальное напряжение
400 В
Шаг
6.2мм
Минимальная рабочая температура
-60°C
Максимальная рабочая температура
+105°C
Сертификация опасной зоны
CSA
Соблюдаемые стандарты
CSA, cULus, DNV GL, EAC
Номер модели
PT 4-FSI/F
Страна происхождения
Poland
Информация о товаре
PT Type F Fused DIN rail terminal block - Phoenix Contact
The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.
The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
тг 2 248,41
тг 2 248,41 Each (ex VAT)
1
тг 2 248,41
тг 2 248,41 Each (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
Phoenix ContactЦвет
Черный
Количество уровней
Одинарный
Американский проволочный калибр AWG
24 → 10AWG (американский проволочный калибр)
Серия
PT 4-FSI/F
Метод оконцовки
Вставной
CSA кабеля
4мм²
С предохранителем
Да
Номинальный ток
10A
Номинальное напряжение
400 В
Шаг
6.2мм
Минимальная рабочая температура
-60°C
Максимальная рабочая температура
+105°C
Сертификация опасной зоны
CSA
Соблюдаемые стандарты
CSA, cULus, DNV GL, EAC
Номер модели
PT 4-FSI/F
Страна происхождения
Poland
Информация о товаре
PT Type F Fused DIN rail terminal block - Phoenix Contact
The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.
The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.