Техническая документация
Характеристики
Brand
MicrochipПоддерживаемый протокол
802.11b, 802.11g, 802.11n
Поддерживаемые стандарты безопасности
WPS
Поддерживаемые интерфейсы шины
UART
Напряжение питания
3.15 → 3.45V
Размеры
17.8 x 26.7 x 2.2мм
Высота
2.2мм
Длина
26.7мм
Максимальная рабочая температура
+85 °C
Минимальная рабочая температура
-40 °C
Ширина
17.8мм
Страна происхождения
Thailand
Информация о товаре
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.
WLAN (Wireless Local Area Network) - Microchip Technology
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
50
P.O.A.
50
Техническая документация
Характеристики
Brand
MicrochipПоддерживаемый протокол
802.11b, 802.11g, 802.11n
Поддерживаемые стандарты безопасности
WPS
Поддерживаемые интерфейсы шины
UART
Напряжение питания
3.15 → 3.45V
Размеры
17.8 x 26.7 x 2.2мм
Высота
2.2мм
Длина
26.7мм
Максимальная рабочая температура
+85 °C
Минимальная рабочая температура
-40 °C
Ширина
17.8мм
Страна происхождения
Thailand
Информация о товаре
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.