McLennan Servo Supplies IP57-M1-10 Редуктор 10:1 Планетарный 12 Н·м 12.69мм 67.75мм 57 мм
Техническая документация
Характеристики
Передаточное число
10:1
Тип редуктора
Планетарный
Максимальный крутящий момент на выходе
12 Nm
Диаметр вала
12.69мм
Диаметр
57 мм
Габаритная длина
67.75mm
Страна происхождения
Switzerland
Информация о товаре
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 115 035,45
Each (ex VAT)
1
тг 115 035,45
Each (ex VAT)
1
Техническая документация
Характеристики
Передаточное число
10:1
Тип редуктора
Планетарный
Максимальный крутящий момент на выходе
12 Nm
Диаметр вала
12.69мм
Диаметр
57 мм
Габаритная длина
67.75mm
Страна происхождения
Switzerland
Информация о товаре
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: