Техническая документация
Характеристики
Brand
FestoХод
50мм
Отверстие
16мм
Серия производителя
DFM
Действие
Двойной
Максимальное рабочее давление
10 бар
Тип амортизации
Эластичный
Model Number p
170837
Номер модели (p)
170837
Размеры
117 x 67 x 32мм
Вес
770г
Максимальная рабочая температура
+80°C
Длина
117мм
Абсолютное максимальное давление
1 Mpa
Высота
32мм
Минимальная рабочая температура
-20°C
Ширина
67мм
Страна происхождения
Germany
Информация о товаре
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
FestoХод
50мм
Отверстие
16мм
Серия производителя
DFM
Действие
Двойной
Максимальное рабочее давление
10 бар
Тип амортизации
Эластичный
Model Number p
170837
Номер модели (p)
170837
Размеры
117 x 67 x 32мм
Вес
770г
Максимальная рабочая температура
+80°C
Длина
117мм
Абсолютное максимальное давление
1 Mpa
Высота
32мм
Минимальная рабочая температура
-20°C
Ширина
67мм
Страна происхождения
Germany
Информация о товаре
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.