Asco E314K035S1N01-24V CC Соленоидный клапан

Код товара RS: 869-2262Бренд: EMERSON – ASCOПарт-номер производителя: E314K035S1N01-24V CC
brand-logo

Техническая документация

Характеристики

Напряжение питания

24 V dc

Количество портов

3

Размер соединения

1/4дюйм

Соединение

1/4 дюйма, G внутренний

Тип выхода

Прямой

Положение клапана по умолчанию

Нормально закрытый

Подходящие области применения

Воздух, масло, вода

Тип

3/2

Диаметр отверстия

2.4мм

Серия

E314K

Материал корпуса

Латунь

Максимальное рабочее давление

10 бар (воздух), 6 бар (масло), 8 бар (вода)

Диапазон рабочих температур

-25 → +90 °C

Максимальная рабочая температура

+90°C

Тип соединителя

Внутренний

Минимальная рабочая температура

-25°C

Стандарт резьбы или тип соединения

G

Максимальное время открытия

25мс

Flow Factor Kv

0.17m³/h

Страна происхождения

Poland

Информация о товаре

Three-way, Direct Operated Valves, N/C

Direct operated solenoid valves with a stainless steel or brass body and NBR rubber seals. Fitted with a manual override and suitable for use with air, inert gases oil and water. ASCOs 314 series solenoid valves provide a compact solution for controlling single-acting actuators or filling and draining systems.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

Asco E314K035S1N01-24V CC Соленоидный клапан

P.O.A.

Asco E314K035S1N01-24V CC Соленоидный клапан
Информация о наличии не успела загрузиться

Купить большой партией

КоличествоЦена единицы
1 - 4P.O.A.
5 - 9P.O.A.
10+P.O.A.

Техническая документация

Характеристики

Напряжение питания

24 V dc

Количество портов

3

Размер соединения

1/4дюйм

Соединение

1/4 дюйма, G внутренний

Тип выхода

Прямой

Положение клапана по умолчанию

Нормально закрытый

Подходящие области применения

Воздух, масло, вода

Тип

3/2

Диаметр отверстия

2.4мм

Серия

E314K

Материал корпуса

Латунь

Максимальное рабочее давление

10 бар (воздух), 6 бар (масло), 8 бар (вода)

Диапазон рабочих температур

-25 → +90 °C

Максимальная рабочая температура

+90°C

Тип соединителя

Внутренний

Минимальная рабочая температура

-25°C

Стандарт резьбы или тип соединения

G

Максимальное время открытия

25мс

Flow Factor Kv

0.17m³/h

Страна происхождения

Poland

Информация о товаре

Three-way, Direct Operated Valves, N/C

Direct operated solenoid valves with a stainless steel or brass body and NBR rubber seals. Fitted with a manual override and suitable for use with air, inert gases oil and water. ASCOs 314 series solenoid valves provide a compact solution for controlling single-acting actuators or filling and draining systems.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.