Техническая документация
Характеристики
Brand
Allegro MicrosystemsТип датчика
Датчики с эффектом Холла
Тип монтажа
Поверхностный монтаж
Магнитный тип
Омниполярный
Максимальное рабочее напряжение питания
3,5 В
Минимальное рабочее напряжение питания
2,5 В
Высота
0.95мм
Размеры
2.98 x 1.91 x 0.95мм
Минимальная рабочая температура
-40 °C
Число контактов
3
Максимальная рабочая температура
+85 °C
Тип корпуса
SOT-23
Типичный гистерезис магнитного датчика
5,9 Гс
Информация о товаре
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.
Hall Effect Sensors, Allegro MicroSystems
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
5
P.O.A.
5
Купить большой партией
Количество | Цена единицы |
---|---|
5 - 20 | P.O.A. |
25 - 95 | P.O.A. |
100 - 245 | P.O.A. |
250 - 495 | P.O.A. |
500+ | P.O.A. |
Техническая документация
Характеристики
Brand
Allegro MicrosystemsТип датчика
Датчики с эффектом Холла
Тип монтажа
Поверхностный монтаж
Магнитный тип
Омниполярный
Максимальное рабочее напряжение питания
3,5 В
Минимальное рабочее напряжение питания
2,5 В
Высота
0.95мм
Размеры
2.98 x 1.91 x 0.95мм
Минимальная рабочая температура
-40 °C
Число контактов
3
Максимальная рабочая температура
+85 °C
Тип корпуса
SOT-23
Типичный гистерезис магнитного датчика
5,9 Гс
Информация о товаре
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.